This item is made-to-order, please allow up to 5 business days before shipping.
Rubber feet
Instead of purchasing Atlas adaptor separately, get the rubber feet variant instead. The main body is made of selective laser sintered Nyon 12 with very good impact resistant and dyed black, and the feet are made of 70A durometer, abrasion resistent, non-marking rubber.
Once installed, it protrudes by 0.6", shorter even than the Ckye spike feet.
Ski feet New Product Intro, Save $10 off MSRP of $59
Ski feet specificly designed for Ckye pod to allow the use of all 3 leg positions, including the widest one which requires the sk feet to pivot up to 60 degrees. The main body is made of selective laser sintered Nyon 12 with very good impact resistant and dyed black.
Atlas adaptor
The reducing sleeves, as the name suggests, reduces the legs to a smaller size to allow the use of Atlas rubber feet.
The compact design only adds 0.3" to the overall length to the legs, and the overall length remains roughtly the same as with the spike feet.
The V2 main body is made of selective laser sintered Nyon 12 with very good impact resistant and dyed black.
Which type should I get?
By default, the recommendation is to get the rubber feet because they are ready-to-use without needing to purchase Atlas feet from other vendors, and result in a lower overall cost.
Get the adaptor if you've already got the Atlas feet and prefers to use them.
Intallation
Remove the factory feet, and install the replacement. Push the feet hard to seat it. The replacement feet are designed with tight tolerance so that you must push it hard to compress the o-ring to seat it, therefore minimizing any wobble. The tip of the spring plunger should be roughtly flat with the outer surface of the leg when fully seated.
Sold as pair.
10 Reviews Hide Reviews Show Reviews
-
Sled feet for Ckye-Pod
They are a little larger diameter than I thought but the bipod will fold up with them in place. They appear well constructed and rotate freely. I usually shoot off a picnic table with a rather rough board top and have these on a 24 pound rifle. They let me shift around and line up my line of sight without grabbing or binding. Definitely like these over the stock spiked feet. I can have the legs splayed out sideways or angled to the front with these feet although forward angling will not fit my table top. Very happy with them and would definitely recommend them to anyone.
-
Cyke pod feet
Great product and well built.
-
Rubber feet for MDT bipod
Perfect fit in a MDT triple pull bipod!
-
Reduced sleeve for ckye pod double pull
Solid product well made.
-
Rubber Feet
This is a great product that allows the use of Atlas feet with you double pull ckye pods.
-
Ckye-Pod rubber feet adapter
This reducing sleeve is absolutely perfect! It fits on my double pull Cyke-Pod as if it were part of the bipod. If you are on the fence about buying one, just do it. You will be glad you did.
-
Reducing Sleeve For MDT Lightweight Double Pull Bipod
Final fit an finish looks like it came from the MDT factory itself
-
Atlas Rubber Feet
This product works great for adapting rubber atlas feet to the double pull ckye pod! With the provided square o-rings there is zero play with the parts. I experienced excellent customer service and the shipping was very quick.
-
Must have
These are a must have. The spiked feet are great for dirt but awful on concrete or props.
